mk North America Modular Aluminum Conveyors
M6 Revolutions supplies and supports mk North America conveyor systems across Washington, Oregon, Idaho, British Columbia, and California.
Same-day reply from a specialist · Free assessment
WHAT THEY MAKE
Conveyors you can reconfigure when the product changes
- Belt conveyor → general product transport
- Modular-chain / timing-belt conveyor → indexed assembly lines
- Pallet-handling conveyor → work-piece routing into cells
- Washdown / stainless belt conveyor → food-grade lines
See mk’s full range of conveyors, aluminum framing, and assembly systems at mknorthamerica.com →
WHERE IT FITS
How to tell whether it fits your project
The question with conveyor is not what it costs to install. It is what it costs the second time, when the product changes and the layout has to change with it.
Belt conveyor covers general transport. Modular-chain and timing-belt handle indexed assembly where position matters. Pallet-handling conveyor routes work-pieces into and out of cells. Washdown and stainless belt covers food-grade lines.
All of it is built from one aluminum extrusion system, with 250+ profiles and 20+ conveyor types, so a rebuild reuses what you already own. The same extrusion builds framing and guarding, which keeps one system on the floor instead of three.
Conveyors carry 33 to 2,200 lbs, covering assembly, packaging, and light-to-medium handling. Tell us what you are moving and we will spec the conveyor.
GOES DEEPER
Plan the rest of the application
Moving heavier unit loads, or need more than a belt? See the conveying page; we match the conveyor to your load and layout.
WHY M6
We spec the cell around the products we supply
A quote from us comes with the application support around it. We match the right equipment to your application, help bring it up, and stay with it through commissioning and beyond. Call 509-310-3584.
COMMON QUESTIONS
Answers before you ask for a quote
What areas do you support mk conveyors in?
M6 Revolutions sells and supports mk North America conveyor and framing systems for manufacturers across Washington, Oregon, Idaho, British Columbia, and California, and helps fit them to your line. We ship mk systems to customers outside the region too.
How much weight can an mk conveyor carry?
The workhorse GUF-P 2000 flat belt carries up to 300 lb at speeds to 500 fpm. On the VersaMove pallet system, Standard handles pallets to about 88 lb and Plus takes them to 300 lb, with Ultra built for the heavier pallet sizes above that. Past that class, the job usually belongs to heavy engineered conveyance, and we carry that line too, so the recommendation follows your load.
Does mk make washdown and food-grade conveyors?
Yes: the CleanMove stainless line, in three sanitation tiers from dry food contact up to raw meat and dairy, built in sanitary 304 stainless for caustic cleaners. Standard suits packaging and dry goods, Plus handles light washdown with mild detergents, and Ultra stands up to high-pressure washdown to 1,500 PSI. If your line gets hosed down every shift, Ultra is the one that survives it.
Should I choose modular aluminum or engineered steel?
Light-to-medium loads on assembly and packaging lines: modular aluminum wins on cost, lead time, and reconfigurability. Full pallets, steel, and freezer duty: heavy engineered conveyance earns its premium. We carry both classes, so the recommendation follows your load rather than a catalog.
What's the workhorse mk conveyor?
The GUF-P 2000 flat-belt: belt widths from 50 to 800 mm, loads to 300 lb, speeds to 500 fpm, on a 50 mm anodized aluminum frame that belongs to the same extrusion system framing the rest of the line. It's the conveyor we've sold most, by a wide margin.
Can I get a CAD model of an mk conveyor?
Yes. Send us the length, width, and height you need and where the drive should sit, and we will build the model in mk's CAD360 configurator and send it back as STEP, DWG, SAT, or PDF, with a budgetary quote alongside. Call 509-310-3584.
Can mk framing integrate guarding and workstations?
Yes, that's the point of the system: the Series 25 to 60 extrusion (over 250 profile shapes) frames the conveyor, holds the guard panels, and builds the workstations, one building kit for the line and its structure.
Do you stock mk spares?
We support the installed base with belts, drive components, and extrusion, so a worn belt is a phone call rather than a line-down. Call 509-310-3584.